Skip to content
BRANDS
  • Menu
  • BRANDS
Skip to product information
JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System-speaker-JBL- Hermes Music
JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System-speaker-JBL- Hermes Music
JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System-speaker-JBL- Hermes Music
JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System-speaker-JBL- Hermes Music
JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System-speaker-JBL- Hermes Music
JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System-speaker-JBL- Hermes Music

Suitable for live-music performances and DJ setups, the JRX225 from JBL provides dual 15" woofers, and thus, offers much in the way of low-end without muddying up the midrange of your signal, providing a solid solution if you're looking for a speaker capable of reproducing thick, lower frequencies without a subwoofer. It can handle between 500 and 1000W into 4 Ohms, and it provides SpeakON and 1/4" TS phone jacks. The JRX225 offers other features such as a rugged 19mm MDF enclosure, steel handles, and a perforated steel grille. Its high-frequency driver is protected by SonicGuard technology, while its waveguide provides coverage control, minimized distortions, and an even frequency response. 

  • Dual JBL low-frequency drivers with a 2.5"-diameter edgewound-ribbon voice coil
  • JBL 2414H-C 1"-polymer-diaphragm compression driver
  • Crossover design shapes frequency response, delivering coherent summation in the crossover region
  • "Quasi 3-Way" design provides low-end without sacrificing performance in the critical midrange; the upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only, thus resulting in a reduction of midrange phase cancellation
  • High-voltage capacitors and inductors with cores and heavy-gauge wire enable the crossover network to handle high power without saturating
  • High-frequency waveguide provides coverage control, reduced distortion, and smooth frequency response
  • The rugged, acoustically efficient enclosure is constructed from 19mm MDF (Medium Density Fiberboard) to ensure durability and low-frequency performance
  • SonicGuard protects the high-frequency driver from excess power without interrupting performance
  • Non-resonant, all-steel handles
  • 18-gauge perforated steel grille protects components from damage

PA Speaker

  • Configuration 2-Way
  • Total Power Capacity
    • 500 W
    • 1000 W Peak
  • System Impedance 4 Ohms (Nominal)

Drivers

  • HF Driver 1 x 1" / 25 mm Polymer Compression Driver
  • LF Driver 2 x 15" / 38.1 cm Woofer

Performance

  • Frequency Range 42 Hz to 18 kHz -10 dB
  • Frequency Response 62 Hz to 13 kHz ±3 dB
  • Maximum SPL 133 dB
  • Coverage Angle 90° H x 50° V
  • Speaker Sensitivity 100 dB SPL

Connectivity

  •  Audio I/O
    • 1 x speakON NL4 Input
    • 1 x 1/4" TS Input

Signal Processing

  •  Crossover 2.2 kHz

JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System

Sale price $609.00
Regular price $687.76You saved 11% OFF

FINANCE WITH SYNCHRONY:
  • Amazon
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
SPECIFICATIONS:

Suitable for live-music performances and DJ setups, the JRX225 from JBL provides dual 15" woofers, and thus, offers much in the way of low-end without muddying up the midrange of your signal, providing a solid solution if you're looking for a speaker capable of reproducing thick, lower frequencies without a subwoofer. It can handle between 500 and 1000W into 4 Ohms, and it provides SpeakON and 1/4" TS phone jacks. The JRX225 offers other features such as a rugged 19mm MDF enclosure, steel handles, and a perforated steel grille. Its high-frequency driver is protected by SonicGuard technology, while its waveguide provides coverage control, minimized distortions, and an even frequency response. 

  • Dual JBL low-frequency drivers with a 2.5"-diameter edgewound-ribbon voice coil
  • JBL 2414H-C 1"-polymer-diaphragm compression driver
  • Crossover design shapes frequency response, delivering coherent summation in the crossover region
  • "Quasi 3-Way" design provides low-end without sacrificing performance in the critical midrange; the upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only, thus resulting in a reduction of midrange phase cancellation
  • High-voltage capacitors and inductors with cores and heavy-gauge wire enable the crossover network to handle high power without saturating
  • High-frequency waveguide provides coverage control, reduced distortion, and smooth frequency response
  • The rugged, acoustically efficient enclosure is constructed from 19mm MDF (Medium Density Fiberboard) to ensure durability and low-frequency performance
  • SonicGuard protects the high-frequency driver from excess power without interrupting performance
  • Non-resonant, all-steel handles
  • 18-gauge perforated steel grille protects components from damage

PA Speaker

  • Configuration 2-Way
  • Total Power Capacity
    • 500 W
    • 1000 W Peak
  • System Impedance 4 Ohms (Nominal)

Drivers

  • HF Driver 1 x 1" / 25 mm Polymer Compression Driver
  • LF Driver 2 x 15" / 38.1 cm Woofer

Performance

  • Frequency Range 42 Hz to 18 kHz -10 dB
  • Frequency Response 62 Hz to 13 kHz ±3 dB
  • Maximum SPL 133 dB
  • Coverage Angle 90° H x 50° V
  • Speaker Sensitivity 100 dB SPL

Connectivity

  •  Audio I/O
    • 1 x speakON NL4 Input
    • 1 x 1/4" TS Input

Signal Processing

  •  Crossover 2.2 kHz
JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System-speaker-JBL- Hermes Music
JBL JRX225 Dual 15" Two-Way Sound-Reinforcement Loudspeaker System
Sale price $609.00
Regular price $687.76You saved 11% OFF
Ask a Question

Contact us if you have any questions!

Our team is ready to help with any questions you may have about this product:

Phone: 956-904-4490


Or send us an email

sales@hermes-music.com

Top-notch support

Wanting support anywhere can be tough, but at Hermes, we take pleasure in helping out our customers!

Secure payments

Hermes uses the same security measures as paying with your physical Credit or Debit Card!

Free Shipping

Free shipping on qualifying orders $250 or more!

Satisfied or refunded

Whether satisfied with your purchase, wanting a refund, or for any other inquiries, please give us a call.
About Us
Finance
Contact
Locations
Quick Links
Subscribe to our Newsletter

Copyright© 2024 Hermes Music 

en
  • Amazon
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Drawer Title

This website uses cookies to ensure you get the best experience on our website.

Similar Products
DESCRIPTION

Suitable for live-music performances and DJ setups, the JRX225 from JBL provides dual 15" woofers, and thus, offers much in the way of low-end without muddying up the midrange of your signal, providing a solid solution if you're looking for a speaker capable of reproducing thick, lower frequencies without a subwoofer. It can handle between 500 and 1000W into 4 Ohms, and it provides SpeakON and 1/4" TS phone jacks. The JRX225 offers other features such as a rugged 19mm MDF enclosure, steel handles, and a perforated steel grille. Its high-frequency driver is protected by SonicGuard technology, while its waveguide provides coverage control, minimized distortions, and an even frequency response. 

SPECIFICATIONS
  • Dual JBL low-frequency drivers with a 2.5"-diameter edgewound-ribbon voice coil
  • JBL 2414H-C 1"-polymer-diaphragm compression driver
  • Crossover design shapes frequency response, delivering coherent summation in the crossover region
  • "Quasi 3-Way" design provides low-end without sacrificing performance in the critical midrange; the upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only, thus resulting in a reduction of midrange phase cancellation
  • High-voltage capacitors and inductors with cores and heavy-gauge wire enable the crossover network to handle high power without saturating
  • High-frequency waveguide provides coverage control, reduced distortion, and smooth frequency response
  • The rugged, acoustically efficient enclosure is constructed from 19mm MDF (Medium Density Fiberboard) to ensure durability and low-frequency performance
  • SonicGuard protects the high-frequency driver from excess power without interrupting performance
  • Non-resonant, all-steel handles
  • 18-gauge perforated steel grille protects components from damage
SPECIFICATIONS

PA Speaker

  • Configuration 2-Way
  • Total Power Capacity
    • 500 W
    • 1000 W Peak
  • System Impedance 4 Ohms (Nominal)

Drivers

  • HF Driver 1 x 1" / 25 mm Polymer Compression Driver
  • LF Driver 2 x 15" / 38.1 cm Woofer

Performance

  • Frequency Range 42 Hz to 18 kHz -10 dB
  • Frequency Response 62 Hz to 13 kHz ±3 dB
  • Maximum SPL 133 dB
  • Coverage Angle 90° H x 50° V
  • Speaker Sensitivity 100 dB SPL

Connectivity

  •  Audio I/O
    • 1 x speakON NL4 Input
    • 1 x 1/4" TS Input

Signal Processing

  •  Crossover 2.2 kHz