Skip to content
Skip to product information

This 4-channel smart amp & PA system delivers 65 Watts of dynamic sound in a sleek, portable design. With dual XLR / 1/4" combo inputs, optional battery power (sold separately), and a built-in looper, Spark EDGE is your all-in-one performance machine.

This 4-channel smart amp & PA system delivers 65 Watts of dynamic sound in a sleek, portable design. With dual XLR / 1/4" combo inputs, optional battery power (sold separately), and a built-in looper, Spark EDGE is your all-in-one performance machine.

Spark EDGE comes equipped with a wide 120° sonic spread and 65 Watts of power—loud enough to draw a crowd.

Fueled by Sonic IQ technology, Spark EDGE integrates advanced computational audio processing with custom acoustic design. Expect clear high frequencies, robust low-end response, and a comprehensive tonal range. Precision-engineered speakers deliver exceptional clarity and detail—for a level of performance previously unattainable in an amplifier of this size.

FEATURES 

  • Optional rechargeable battery (sold separately) gives you up to 8 hours of playtime.
  • 8 Programmable presents each for Channels 1 and 2 (16 total).
  • Tilt it back for upward sound projection or to use it as a personal monitor. Stand it upright for a direct, focused blast.
  • Recessed ergonomic handle for easy carry.
  • Swappable grilles—limited time grilles that draw attention and set the scene (sold separately).
  • Top panel volume controls—easily tweak the balance and master volume.
  • Frequency Range: 45-20,000 Hz
  • Stereo/MONO: Mono
  • Maximum Sound Pressure Level: 
    • RMS: 116 dB SPL @ 1m
    • Peak: 120 dB SPL @ 1m
  • Cabinet Principle: Bass Reflex (2x Reflex Port)
  • Power Amplifiers: 65W RMS Class D Amplifier
  • Speakers:
    • 1x 6.5 inch Custom Designed Woofer
    • 1x 1 inch Custom Designed Horn Tweeter
  • Total Impedance: 4 ohms
  • Onboard Looper: Up to 60 Seconds of Recording Time (Looper is for Channel 1 Only)
  • Top Panel Controls: 
    • Channel 1 Eight Customizable Preset Selector
    • Channel 1 Volume Knob
    • Channel 2 Eight Customizable Preset Selector
    • Channel 2 Volume Knob
    • Channel 3 & 4 Volume Knob
    • Music Channel Volume Knob
  • Rear Panel Controls: 
    • Power Button
    • Bluetooth Pair Button
    • Master Controls (Low, Mid, High, Volume)
  • Onboard Presets: 8 Fully Customizable Presets for Each Channel 1 & 2
  • Computational Audio: 
    • Sonic IQ Computational Audio
    • Dedicated Computational Audio Chip
    • Dynamic Range Compression
    • Bass Enhancement
    • Stereo Widening
    • Auto EQ
  • Onboard Tuner: Guitar/Bass Tuner With LED Display
  • Amps & Effects:
    • Channel 1:
      36 Amp Models (for Electric Guitar, Acoustic Guitar, Bass and Vocal)
      50 Effects (Noise Gate, Compressor, Distortion, Modulation/EQ, Delay, Reverb)
      Choose up to 3 Pre-amp Effects, 3 Post-amp Effects, and 1 Amp Model for Each Preset
    • Channel 2:
      3 Amp Models (for Vocal, Bass & Acoustic Guitar)
      50 Effects (Noise Gate, Compressor, Distortion, Modulation/EQ, Delay, Reverb)
      Choose up to 1 Pre-amp Effect, 2 Post-amp Effects, and 1 Amp Model for Each Preset
  • Wired Connectivity: 
    • XLR / 1/4" Combo Input x2
    • 1/4" Instrument Input x2
    • 1/8" Headphone Output x1
    • 1/4" Line Output x2 (L/Mono & R)
    • Din 5Pin MIDI Input x1
  • Wireless Connectivity: Bluetooth 5.0
  • USB Audio:
    • USB Interface for Recording, Compatible with MacOS and Windows
    • 2 In x 2 Out
    • 24 Bit, 48 kHz Sample Rate

Spark EDGE Portable 4-Channel Smart Amp & PA System

Regular price $449.00

FINANCE WITH SYNCHRONY:

  • Amazon
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
SPECIFICATIONS:

This 4-channel smart amp & PA system delivers 65 Watts of dynamic sound in a sleek, portable design. With dual XLR / 1/4" combo inputs, optional battery power (sold separately), and a built-in looper, Spark EDGE is your all-in-one performance machine.

This 4-channel smart amp & PA system delivers 65 Watts of dynamic sound in a sleek, portable design. With dual XLR / 1/4" combo inputs, optional battery power (sold separately), and a built-in looper, Spark EDGE is your all-in-one performance machine.

Spark EDGE comes equipped with a wide 120° sonic spread and 65 Watts of power—loud enough to draw a crowd.

Fueled by Sonic IQ technology, Spark EDGE integrates advanced computational audio processing with custom acoustic design. Expect clear high frequencies, robust low-end response, and a comprehensive tonal range. Precision-engineered speakers deliver exceptional clarity and detail—for a level of performance previously unattainable in an amplifier of this size.

FEATURES 

  • Optional rechargeable battery (sold separately) gives you up to 8 hours of playtime.
  • 8 Programmable presents each for Channels 1 and 2 (16 total).
  • Tilt it back for upward sound projection or to use it as a personal monitor. Stand it upright for a direct, focused blast.
  • Recessed ergonomic handle for easy carry.
  • Swappable grilles—limited time grilles that draw attention and set the scene (sold separately).
  • Top panel volume controls—easily tweak the balance and master volume.
  • Frequency Range: 45-20,000 Hz
  • Stereo/MONO: Mono
  • Maximum Sound Pressure Level: 
    • RMS: 116 dB SPL @ 1m
    • Peak: 120 dB SPL @ 1m
  • Cabinet Principle: Bass Reflex (2x Reflex Port)
  • Power Amplifiers: 65W RMS Class D Amplifier
  • Speakers:
    • 1x 6.5 inch Custom Designed Woofer
    • 1x 1 inch Custom Designed Horn Tweeter
  • Total Impedance: 4 ohms
  • Onboard Looper: Up to 60 Seconds of Recording Time (Looper is for Channel 1 Only)
  • Top Panel Controls: 
    • Channel 1 Eight Customizable Preset Selector
    • Channel 1 Volume Knob
    • Channel 2 Eight Customizable Preset Selector
    • Channel 2 Volume Knob
    • Channel 3 & 4 Volume Knob
    • Music Channel Volume Knob
  • Rear Panel Controls: 
    • Power Button
    • Bluetooth Pair Button
    • Master Controls (Low, Mid, High, Volume)
  • Onboard Presets: 8 Fully Customizable Presets for Each Channel 1 & 2
  • Computational Audio: 
    • Sonic IQ Computational Audio
    • Dedicated Computational Audio Chip
    • Dynamic Range Compression
    • Bass Enhancement
    • Stereo Widening
    • Auto EQ
  • Onboard Tuner: Guitar/Bass Tuner With LED Display
  • Amps & Effects:
    • Channel 1:
      36 Amp Models (for Electric Guitar, Acoustic Guitar, Bass and Vocal)
      50 Effects (Noise Gate, Compressor, Distortion, Modulation/EQ, Delay, Reverb)
      Choose up to 3 Pre-amp Effects, 3 Post-amp Effects, and 1 Amp Model for Each Preset
    • Channel 2:
      3 Amp Models (for Vocal, Bass & Acoustic Guitar)
      50 Effects (Noise Gate, Compressor, Distortion, Modulation/EQ, Delay, Reverb)
      Choose up to 1 Pre-amp Effect, 2 Post-amp Effects, and 1 Amp Model for Each Preset
  • Wired Connectivity: 
    • XLR / 1/4" Combo Input x2
    • 1/4" Instrument Input x2
    • 1/8" Headphone Output x1
    • 1/4" Line Output x2 (L/Mono & R)
    • Din 5Pin MIDI Input x1
  • Wireless Connectivity: Bluetooth 5.0
  • USB Audio:
    • USB Interface for Recording, Compatible with MacOS and Windows
    • 2 In x 2 Out
    • 24 Bit, 48 kHz Sample Rate
Spark EDGE Portable 4-Channel Smart Amp & PA System
Ask a Question

Contact us if you have any questions!

Our team is ready to help with any questions you may have about this product:

Phone: 956-904-4490


Or send us an email

Top-notch support

Wanting support anywhere can be tough, but at Hermes, we take pleasure in helping out our customers!

Secure payments

Hermes uses the same security measures as paying with your physical Credit or Debit Card!

Free Shipping

Free shipping on qualifying orders $250 or more!

Satisfied or refunded

Whether satisfied with your purchase, wanting a refund, or for any other inquiries, please give us a call.

Drawer Title

This website uses cookies to ensure you get the best experience on our website.

Similar Products
DESCRIPTION 

This 4-channel smart amp & PA system delivers 65 Watts of dynamic sound in a sleek, portable design. With dual XLR / 1/4" combo inputs, optional battery power (sold separately), and a built-in looper, Spark EDGE is your all-in-one performance machine.

This 4-channel smart amp & PA system delivers 65 Watts of dynamic sound in a sleek, portable design. With dual XLR / 1/4" combo inputs, optional battery power (sold separately), and a built-in looper, Spark EDGE is your all-in-one performance machine.

Spark EDGE comes equipped with a wide 120° sonic spread and 65 Watts of power—loud enough to draw a crowd.

Fueled by Sonic IQ technology, Spark EDGE integrates advanced computational audio processing with custom acoustic design. Expect clear high frequencies, robust low-end response, and a comprehensive tonal range. Precision-engineered speakers deliver exceptional clarity and detail—for a level of performance previously unattainable in an amplifier of this size.

FEATURES 

  • Optional rechargeable battery (sold separately) gives you up to 8 hours of playtime.
  • 8 Programmable presents each for Channels 1 and 2 (16 total).
  • Tilt it back for upward sound projection or to use it as a personal monitor. Stand it upright for a direct, focused blast.
  • Recessed ergonomic handle for easy carry.
  • Swappable grilles—limited time grilles that draw attention and set the scene (sold separately).
  • Top panel volume controls—easily tweak the balance and master volume.
SPECIFICATIONS 
  • Frequency Range: 45-20,000 Hz
  • Stereo/MONO: Mono
  • Maximum Sound Pressure Level: 
    • RMS: 116 dB SPL @ 1m
    • Peak: 120 dB SPL @ 1m
  • Cabinet Principle: Bass Reflex (2x Reflex Port)
  • Power Amplifiers: 65W RMS Class D Amplifier
  • Speakers:
    • 1x 6.5 inch Custom Designed Woofer
    • 1x 1 inch Custom Designed Horn Tweeter
  • Total Impedance: 4 ohms
  • Onboard Looper: Up to 60 Seconds of Recording Time (Looper is for Channel 1 Only)
  • Top Panel Controls: 
    • Channel 1 Eight Customizable Preset Selector
    • Channel 1 Volume Knob
    • Channel 2 Eight Customizable Preset Selector
    • Channel 2 Volume Knob
    • Channel 3 & 4 Volume Knob
    • Music Channel Volume Knob
  • Rear Panel Controls: 
    • Power Button
    • Bluetooth Pair Button
    • Master Controls (Low, Mid, High, Volume)
  • Onboard Presets: 8 Fully Customizable Presets for Each Channel 1 & 2
  • Computational Audio: 
    • Sonic IQ Computational Audio
    • Dedicated Computational Audio Chip
    • Dynamic Range Compression
    • Bass Enhancement
    • Stereo Widening
    • Auto EQ
  • Onboard Tuner: Guitar/Bass Tuner With LED Display
  • Amps & Effects:
    • Channel 1:
      36 Amp Models (for Electric Guitar, Acoustic Guitar, Bass and Vocal)
      50 Effects (Noise Gate, Compressor, Distortion, Modulation/EQ, Delay, Reverb)
      Choose up to 3 Pre-amp Effects, 3 Post-amp Effects, and 1 Amp Model for Each Preset
    • Channel 2:
      3 Amp Models (for Vocal, Bass & Acoustic Guitar)
      50 Effects (Noise Gate, Compressor, Distortion, Modulation/EQ, Delay, Reverb)
      Choose up to 1 Pre-amp Effect, 2 Post-amp Effects, and 1 Amp Model for Each Preset
  • Wired Connectivity: 
    • XLR / 1/4" Combo Input x2
    • 1/4" Instrument Input x2
    • 1/8" Headphone Output x1
    • 1/4" Line Output x2 (L/Mono & R)
    • Din 5Pin MIDI Input x1
  • Wireless Connectivity: Bluetooth 5.0
  • USB Audio:
    • USB Interface for Recording, Compatible with MacOS and Windows
    • 2 In x 2 Out
    • 24 Bit, 48 kHz Sample Rate