Introducing the latest and most portable addition to the Alesis Strike Amp family – the Strike Amp 8. This electronic drum amp is your perfect practice companion, featuring a handsomely-housed 8” woofer and built-in mixer. Want to invite some friends over to jam? The Strike Amp 8 cuts through the mix so you won’t get drowned-out by your bandmates. Whatever the situation, the Alesis Drums Strike Amp Series are the best amps to power your drums.

With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker will always play loud and clear, in any space, in any situation—whether you’re performing, recording or rehearsing. The heavy-duty 8-inch low frequency driver really adds the “kick” to kickdrum. And the high-frequency compression driver in its computer-optimized waveguide conveys all the brilliance and snap of your snare drum and cymbals. Power. Precision. Drama. Using the Strike Amp 8 is like driving a race car that’s absolutely glued to the track and it never run out of horsepower.

But there’s a lot more to this speaker than just pure power and portability. A lot more. The Strike Amp 8 has all the versatility and features needed to fit in anywhere and it’s a snap to set up and use. You can use it vertically or tilt it back horizontally like a stage monitor. There’s an XLR output to link another Strike Amp 8 or send your performance to another input device. Need to customize the sound for that “just right” tone? Use the Contour EQ control. And the (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator means there is virtually unlimited hookup versatility and you’ll never unknowingly overdrive the speaker into distortion.

• Output Power: 2000 W (peak, 1300 LF + 700 HF)
                            1000 W (continuous RMS, 650 LF + 350 HF)
• Drivers: 
  • Low Frequency: 8.0” (203 mm) driver, 2.5” (65 mm) high-temperature
    voice coil 
  • High Frequency: 1.4” (35 mm) neodymium driver with precision
    waveguide 
• Crossover Frequency: 2.5 KHz
• Maximum SPL: 129 dB (peak), 126 dB (continuous) (dB-SPL @ 1 m)
• Frequency Response: 62 Hz – 20 kHz (+3 dB)
• Frequency Range: 52 Hz – 22 kHz (-10 dB)
• Horn Coverage: 90º horizontal x 60º vertical (nominal)
• Equalization: Contour switch with low- and high-frequency +3 dB boost
• Connectors: (2) XLR/TRS 1/4” (6.35 mm) combo inputs
                       (1) XLR link output
                       (1) IEC power cable input
• Controls: Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
• Indicators: Power LED (rear panel), clip limiter LED
• Protection: Electronic clip, thermal & transducer overdrive 
• Power: 
  • Connection: IEC
  • Input Voltage: 100 V~, 110–120 V~, 220–240 V~; 50/60 Hz (switchable)
  • Fuse: 100–120V T10AL AC250V
              220–240V T5AL AC250V
  • Consumption: 800 W
• Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille 
• Mounting: Standard 36 mm pole socket 
• Dimensions: 17.1” x 10.1” x 9.6” / 434 x 256 x 245 mm
• Weight: 20.2 lb. / 9.2 kg